You can spend a few hours in the garage and change brake pads yourself if you know how to do it. Additionally, as brake pads are a consumable component that must be replaced often over the course of a vehicle’s lifespan, you’ll have plenty of experience and possibly pick up some tips along the way that will make the operation quicker and simpler. If you want Brake Pads Replacement in Farnborough before but have never done it on your own, here are a few starting points for you.
-
SETUP FOR SAFETY
Make sure the car is correctly lifted off the ground at the proper lifting points and held there with jack stands—never merely jacks, cinder blocks, or other such improvised stands—to keep yourself and others safe.
- DECONSTRUCTION
To keep track of where the components are placed, think about snapping images both before and throughout the process.
To make it simpler to shove the pistons in when removing the caliper, you can first crack the top on the master cylinder reservoir. However, don’t forget to tighten it back down at the finish, and avoid opening any other parts of the system because doing so will need bleeding.
- ANALYSIS
Examine every brake component you come across besides the pads carefully, especially little pieces like caliper pins, and replace it if it isn’t up to grade. Lets learn about Brake Pads Replacement in Farnborough.
Examine parts such as rotors for scoring, warping, corrosion, or any other unusual wear. Check your calipers and lines for leaks, and look for strange wear or glazing on your old pads. When something is wrong with your braking system, these are the usual suspects. Additionally, this is a good time to look for wear, alignment issues, rust, or other obvious abnormalities in the nearby suspension.
4. Reinstallation
Before putting something back together, brush off any extra grease and grime to make sure a part may be reused. This will keep things running smoothly and highlight flaws you might not have noticed earlier.
In order to lessen squeaking, be sure you lubricate the caliper bolts as well as the back of the new brake pads.
- INSTALLING THE BRAKES
Finally, give the new brake pads some time to break in by finding a stretch of road where you can drive at a steady 30 mph for half a mile before carefully coming to a halt. About 20 times, do this. If at all possible, try to steer clear of harsh braking, especially in the days immediately following a pad change. By doing this, you can ensure that the pads will wear evenly and last a long time.
As you perform your own brake pad replacements more frequently, you’ll develop tips and techniques that streamline the process. Continue practicing if you want to really master the procedure!